[{"data":1,"prerenderedAt":-1},["ShallowReactive",2],{"$feyUTSXIkJpvLcd9AABbCwj2qYtjne76UirRfv99sou8":3},{"answer":4,"createTime":5,"id":6,"options":7,"origin":12,"question":19,"related":20,"source":24,"type":25},[],"2023-10-18 20:49:02",100552686,[8,9,10,11],"30%","20%","10%","40%",{"count":13,"courseId":14,"courseImg":15,"courseName":16,"workId":17,"workName":18},67,"74d92d34d140f5ae885dd5d354fda1ea","https:\u002F\u002Ftihai-oss-cloud.itihey.com\u002Fimg\u002F8b66ab251e2464ca48a0e7c954b4763c.png","地基基础检测技术","3d4157e47fe84586995ff7c0ed5aae18","3.4 桩基完整性测验","混凝土桩的桩身完整性检测,对于设计等级为甲级,或地质条件复杂、成桩质量可靠性较低的灌注桩工程,抽检数量不应少于总桩数的( ),且不得少于 20 根",[21,26,35,44,53,62,72,82,89,98],{"answer":22,"createTime":5,"id":6,"options":23,"question":19,"source":24,"type":25},[],[8,9,10,11],"v1",0,{"answer":27,"createTime":5,"id":28,"options":29,"question":34,"source":24,"type":25},[],100552690,[30,31,32,33],"90°","180°","60°","120°","采用低应变反射波法检测桩身完整性时,空心桩的激振与测量传感器安装位置宜在同一水平面上,且与桩中心连线形成的角宜为( )",{"answer":36,"createTime":5,"id":37,"options":38,"question":43,"source":24,"type":25},[],100552693,[39,40,41,42],"1500m\u002Fs","2000m\u002Fs","3000m\u002Fs","4000m\u002Fs","已知桩长为20m,测得反射波时间为10ms,则波速为( )",{"answer":45,"createTime":5,"id":46,"options":47,"question":52,"source":24,"type":25},[],100552695,[48,49,50,51],"1000Hz","1500Hz","2000Hz","2500Hz","当采用频域分析时,若信号中的最高频率分量为1000Hz,则采样频率至少应设置为( )",{"answer":54,"createTime":5,"id":55,"options":56,"question":61,"source":24,"type":25},[],100552698,[57,58,59,60],"0-KHz","0-2KHz","0-5KHz","0-10KHz","低应变检测中一般采用速度传感器和加速传感器,加速度传感器的频响特性优与速度传感器,其频响范围一般为( )",{"answer":63,"createTime":64,"id":65,"options":66,"question":71,"source":24,"type":25},[],"2023-10-18 20:49:03",100552700,[67,68,69,70],"3天","5天","10天","14天","在进行低应变检测桩的完整性时,宜在成桩几天后进行( )",{"answer":73,"createTime":74,"id":75,"options":76,"question":81,"source":24,"type":25},[],"2025-11-14 17:29:09",100552703,[77,78,79,80],"1","2","3","4","混凝土桩的桩身完整性抽检数量时,柱下三桩或三桩以下承台的抽检数不得少于 ( )根",{"answer":83,"createTime":64,"id":84,"options":85,"question":88,"source":24,"type":25},[],100552705,[86,10,9,87],"5%","15%","当采用低应变、高应变和声波透射法抽检桩身完整性所发现Ⅲ、Ⅳ类桩之和大于抽检桩数的 ( ) 时,宜采用原检测方法继续扩大抽检.",{"answer":90,"createTime":64,"id":91,"options":92,"question":97,"source":24,"type":25},[],100552707,[93,94,95,96],"高频","低频","宽频","窄频","对于低应变反射法,要检测桩身深部缺陷,应选用可产生较丰实的( )信号的材质锤头",{"answer":99,"createTime":64,"id":100,"options":101,"question":106,"source":24,"type":25},[],100552709,[102,103,104,105],"截面缩小","截面不变","与截面无关","截面扩大","当在桩顶测出的反射波速度或应力与入射波信号极性一致,则表明在相应的位置存在( )"]