[{"data":1,"prerenderedAt":-1},["ShallowReactive",2],{"$f881gYaH-9D_T8dAmCrXoLGNRMuHDQxQ50lQQto_ip4k":3},{"answer":4,"createTime":5,"id":6,"options":7,"origin":12,"question":19,"related":20,"source":31,"type":32},[],"2024-01-05 14:24:14",127445787,[8,9,10,11],"柴油机停车后","喷油器拆装后","系统管路拆装重新连接后","喷油器拆装后+系统管路拆装重新连接后",{"count":13,"courseId":14,"courseImg":15,"courseName":16,"workId":17,"workName":18},190,"92ba54c91f73a7c065d5f17dfaaab31a","https:\u002F\u002Ftihai-oss-cloud.itihey.com\u002Fimg\u002Fefb3d2d688b6265025c55d52cc474a88.png","船舶主推进动力装置","work_31905918","往届收集题目1(193道)","柴油机喷射系统在下列情况下必须要排除空气___",[21,33,42,51,60,69,78,87,96,104],{"answer":22,"createTime":23,"id":24,"options":25,"question":30,"source":31,"type":32},[],"2024-01-05 14:24:09",127445497,[26,27,28,29],"燃烧发生后燃","中心线不正","高温腐蚀","滑油高温结焦","气阀阀杆卡死通常是由下列原因引起的,其中哪一项是错误的__","v1",0,{"answer":34,"createTime":23,"id":35,"options":36,"question":41,"source":31,"type":32},[],127445498,[37,38,39,40],"有3个空气瓶,瓶内压力为3.0~3.5Mpa","有2个空气瓶,瓶内压力为1.5~2.5MPa","有3个空气瓶,瓶内压力为2.5~3.0MPa","有2个空气瓶,瓶内压力为2.5~3.0MPa","根据我国海船建造规范规定,起动空气瓶应保证至少",{"answer":43,"createTime":23,"id":44,"options":45,"question":50,"source":31,"type":32},[],127445501,[46,47,48,49],"套管式","固定喷管式","连杆钻孔喷射式","铰链式","以淡水作为冷却介质的活塞冷却机构应采用下列机构___",{"answer":52,"createTime":23,"id":53,"options":54,"question":59,"source":31,"type":32},[],127445502,[55,56,57,58],"滑油冷却器","冷却水泵","滑油泵","滑油粗、细滤器","下述哪一个设备不属于组成船舶动力装置中的润滑系统的主要设备",{"answer":61,"createTime":23,"id":62,"options":63,"question":68,"source":31,"type":32},[],127445503,[64,65,66,67],"气密环","压缩环、刮油环和承磨环","压缩环、承磨环","压缩环、刮油环","船用中、高速柴油机的活塞环分为___",{"answer":70,"createTime":23,"id":71,"options":72,"question":77,"source":31,"type":32},[],127445506,[73,74,75,76],"球墨铸铁","铝合金","铜合金","铸铁","中、小型柴油机的活塞材料一般选用___",{"answer":79,"createTime":23,"id":80,"options":81,"question":86,"source":31,"type":32},[],127445508,[82,83,84,85],"无规律°","相等","增压机大于非增压机","非增压机大于增压机","四冲程非增压与增压柴油机比较,进排气阀重叠角一般是___",{"answer":88,"createTime":23,"id":89,"options":90,"question":95,"source":31,"type":32},[],127445510,[91,92,93,94],"加工精度要求高","油束射程长易喷到燃烧室壁面","喷孔易结炭","燃油雾化质量差","单孔式喷油器与多孔式喷油器比较,其主要缺点是___",{"answer":97,"createTime":23,"id":98,"options":99,"question":103,"source":31,"type":32},[],127445512,[100,101,28,102],"穴蚀","低温腐蚀","电化学腐蚀","气缸套内表面受到的腐蚀通常是___",{"answer":105,"createTime":23,"id":106,"options":107,"question":112,"source":31,"type":32},[],127445513,[108,109,110,111],"检查各缸油门齿条刻度值","测各缸最高爆发压力Pz","测示功图并计算各缸平均指示压力Pi","单缸轮流停油观察转速的变化幅度","使用回油孔式喷油泵的多缸柴油机,判断各缸负荷均匀性的可靠方法是___"]