[{"data":1,"prerenderedAt":-1},["ShallowReactive",2],{"$fMaSB_3RIPXotsUbeT-uBhdklAlswI5EEtdCuYF6NOA0":3},{"answer":4,"createTime":5,"id":6,"options":7,"origin":12,"question":19,"related":20,"source":30,"type":31},[],"2024-10-15 13:30:35",161761695,[8,9,10,11],"无线局域网MAC帧中的地址1没有以太网MAC帧中对应的地址字段","无线局域网MAC帧中的地址3作为以太网MAC帧中的目的MAC地址","无线局域网MAC帧中的地址4没有以太网MAC帧中对应的地址字段","无线局域网MAC帧中的地址2作为以太网MAC帧中的源MAC地址",{"count":13,"courseId":14,"courseImg":15,"courseName":16,"workId":17,"workName":18},30,"2f12bee5693270721c09693cc70eb592","https:\u002F\u002Ftihai-oss-cloud.itihey.com\u002Fimg\u002F36710788b6c26c8320256a9163073bcc.jpg","241学期 组网实践（软件）","work_37740294","MOOC实验练习1","AP完成无线局域网MAC帧至以太网MAC帧转换过程时,以下那一项关于地址之间的转换是错误的",[21,32,41,49,58,66,75,84,93,102],{"answer":22,"createTime":5,"id":23,"options":24,"question":29,"source":30,"type":31},[],161761666,[25,26,27,28],"PT WAN仿真设备可以仿真PSTN、ADSL","PT命令行接口下可以执行全部Cisco IOS命令","PT可以仿真终端和服务器","PT可以仿真Cisco交换机、路由器","关于packet tracer(简称PT),以下哪一项描述是错误的","v1",0,{"answer":33,"createTime":5,"id":34,"options":35,"question":40,"source":30,"type":31},[],161761667,[36,37,38,39],"终端、服务器和路由器安装的接口模块数量不受限制","终端、服务器和路由器可以安装不同的接口模块","不同的接口模块连接不同的网络","路由器通过增加接口模块增加互联的网络","关于设备配置,以下哪一项描述是错误的",{"answer":42,"createTime":5,"id":43,"options":44,"question":40,"source":30,"type":31},[],161761668,[45,46,47,48],"物理配置方式用于安装接口模块","命令行接口用于完成复杂配置过程","图形配置方式和命令行接口配置方式可以相互取代","图形配置方式用于完成简单配置过程",{"answer":50,"createTime":5,"id":51,"options":52,"question":57,"source":30,"type":31},[],161761669,[53,54,55,56],"可以用"↑"键给出上一次输入的命令","可以用"←"和"→"键移动光标到命令修改处","可以直接用新的配置覆盖旧的配置","可以用"no 命令"撤销已经输入的命令","关于命令行配置方式,以下那一项是错误的",{"answer":59,"createTime":5,"id":60,"options":61,"question":57,"source":30,"type":31},[],161761670,[62,63,64,65],"可以在任意模式间转换","全局模式可以对设备进行配置","用户模式可以查看设备状态","特权模式可以清除设备控制信息",{"answer":67,"createTime":5,"id":68,"options":69,"question":74,"source":30,"type":31},[],161761671,[70,71,72,73],"通过将光标移动到某个设备上查看该设备部分端口状态","通过单击某个设备查看该设备状态和控制信息","可以用查看工具查看设备状态和控制信息","可以在用户模式下通过"show"命令查看设备状态和控制信息","关于查看设备控制和状态信息,以下那一项是错误的",{"answer":76,"createTime":5,"id":77,"options":78,"question":83,"source":30,"type":31},[],161761672,[79,80,81,82],"在源端与目的端之间完成一次ping操作","源端向目的端发送ICMP ECHO请求报文","源端向目的端发送一封信件","目的端向源端回送ICMP ECHO响应报文","关于简单报文工具,以下那一项是错误的",{"answer":85,"createTime":5,"id":86,"options":87,"question":92,"source":30,"type":31},[],161761673,[88,89,90,91],"可以指定设备之间的物理距离","可以将设备放置在指定的位置","可以仿真一个物理环境","物理工作区中设备之间的距离对应逻辑工作区中设备之间的距离","关于物理工作区,以下那一项是错误的",{"answer":94,"createTime":5,"id":95,"options":96,"question":101,"source":30,"type":31},[],161761674,[97,98,99,100],"需要激发源终端至目的终端PDU传输过程","只能通过简单报文工具激发源终端至目的终端PDU传输过程","可以通过选择协议指定查看的PDU","可以查看网络设备转发该PDU的流程","关于模拟操作模式,以下那一项是错误的",{"answer":103,"createTime":5,"id":104,"options":105,"question":110,"source":30,"type":31},[],161761675,[106,107,108,109],"直观演示协议作用过程","完成各种类型网络设计、调试过程","完成网络设备配置过程","仿真Cisco全部网络设备","关于packet tracer的作用,以下那一项描述是错误的"]