[{"data":1,"prerenderedAt":-1},["ShallowReactive",2],{"$fBxvIpx69NR8wpckNKVkFyC5phOrZJd0atHbqUGUTt-o":3},{"answer":4,"createTime":5,"id":6,"options":7,"origin":8,"question":15,"related":16,"source":22,"type":23},[],"2025-11-25 01:35:31",241076967,[],{"count":9,"courseId":10,"courseImg":11,"courseName":12,"workId":13,"workName":14},12,"53e1d2ef4961cca8eea3e23969ad2cb9","https:\u002F\u002Ftihai-oss-cloud.itihey.com\u002Fimg\u002F03a579384a6dc297c89809b582fcc767.png","默认课程","work_45577318","第六章填空题","从频域角度,系统的串连校正方式主要有____校正、____校正和____校正",[17,24,29,34,39,42,47,52,57,62],{"answer":18,"createTime":5,"id":19,"options":20,"question":21,"source":22,"type":23},[],241076963,[],"通过增加适当的装置改善系统特性的方法称为____,为此目的而加入的装置称为____","v1",2,{"answer":25,"createTime":5,"id":26,"options":27,"question":28,"source":22,"type":23},[],241076964,[],"控制系统的基本的校正方式有____校正、____校正、____校正和____校正",{"answer":30,"createTime":5,"id":31,"options":32,"question":33,"source":22,"type":23},[],241076965,[],"PID控制器的输入-输出关系为____由此可得PID控制器的传递函数为____",{"answer":35,"createTime":5,"id":36,"options":37,"question":38,"source":22,"type":23},[],241076966,[],"微分环节起到"提前预报"的作用.其作用的结果是使系统的超调____,振荡____,过渡过程____.但PD控制器对____过于敏感",{"answer":40,"createTime":5,"id":6,"options":41,"question":15,"source":22,"type":23},[],[],{"answer":43,"createTime":5,"id":44,"options":45,"question":46,"source":22,"type":23},[],241076968,[],"超前校正的主要作用是____.可以用它补偿系统固有部分在截止角频率附近的相角滞后,以提高系统的____改善系统的动态特性.超前校正会使系统的截止频率后移,所以计算超前角时需要留出____",{"answer":48,"createTime":5,"id":49,"options":50,"question":51,"source":22,"type":23},[],241076969,[],"滞后校正能够在开环比例系数 不降低的前提下,降低____频段和____频段的开环增益而不影响____频段",{"answer":53,"createTime":5,"id":54,"options":55,"question":56,"source":22,"type":23},[],241076970,[],"超前校正适用于改善系统的____,而滞后校正常用于改善系统的____.如果系统的动态和稳态特性均较差时,通常需采用____",{"answer":58,"createTime":5,"id":59,"options":60,"question":61,"source":22,"type":23},[],241076971,[],"滞后校正的转折频率 选得距截止频率 越远,滞后校正装置本身在 处造成的相角滞后就____.然而, 距 越远,容易造成"____"现象",{"answer":63,"createTime":5,"id":64,"options":65,"question":66,"source":22,"type":23},[],241076972,[],"用根轨迹法进行系统校正,是将高阶系统看作欠阻尼二阶系统进行设计,所以,在校正装置设计之后,需要进行____,看被忽略掉的系统极点对系统动态性能的影响.正因为降阶处理的粗略性,设计之初确定主导极点位置时需要留出____"]