[{"data":1,"prerenderedAt":-1},["ShallowReactive",2],{"$fnCiROFN8mVVO-Z2pr_1FwWR4QxsaQxkCkMjXmVgcsnM":3},{"answer":4,"createTime":5,"id":6,"options":7,"origin":12,"question":15,"related":16,"source":20,"type":21},[],"2026-04-20 10:38:44",1089305562,[8,9,10,11],"边形核边长大","先形核后长大","自发形核和非自发形核","枝晶生长",{"courseImg":13,"courseName":14},"https:\u002F\u002Ftihai-oss-cloud.itihey.com\u002Fimg\u002F16b08883a10975cc926c879c81d4307b.jpg","材料科学基础","液态金属结晶的基本过程是( )",[17,22,30,39,44,53,62,67,72,82],{"answer":18,"createTime":5,"id":6,"options":19,"question":15,"source":20,"type":21},[],[8,9,10,11],"v2",0,{"answer":23,"createTime":5,"id":24,"options":25,"question":28,"source":20,"type":29},[],1089305592,[26,27],"对","错","金属化合物的特点是硬而脆,莱氏体性能也是硬而脆,故莱氏体属于金属化合物.( )",3,{"answer":31,"createTime":5,"id":32,"options":33,"question":38,"source":20,"type":21},[],1089305597,[34,35,36,37],"加入形核剂","减小液相过冷度","对液相实施搅拌","增加液相过冷度","凝固时不能有效降低晶粒尺寸的是以下哪种方法.( )",{"answer":40,"createTime":5,"id":41,"options":42,"question":43,"source":20,"type":29},[],1089305640,[26,27],"置换固溶体不可能是无限固溶体.( )",{"answer":45,"createTime":5,"id":46,"options":47,"question":52,"source":20,"type":21},[],1089305653,[48,49,50,51],"2%","2. 06%","2. 11%","2. 2%","在Fe-Fe3C相图中,钢与铁的分界点的含碳量为( )",{"answer":54,"createTime":5,"id":55,"options":56,"question":61,"source":20,"type":21},[],1089305655,[57,58,59,60],"切应力","最大压应力","最大拉应力","不能确定","零件中的流线应与其工作时所受到的( )方向一致",{"answer":63,"createTime":5,"id":64,"options":65,"question":66,"source":20,"type":29},[],1089305661,[26,27],"过冷是结晶的必要条件,无论过冷度大小,均能保证结晶过程得以进行.( )",{"answer":68,"createTime":5,"id":69,"options":70,"question":71,"source":20,"type":29},[],1089305689,[26,27],"在实际生产条件下,金属凝固时的过冷度都很小(<20℃),其主要原因是由于非均匀形核的结果.( )",{"answer":73,"createTime":5,"id":74,"options":75,"question":80,"source":20,"type":81},[],1089305691,[76,77,78,79],"温度高,晶粒长大速度快","杂质和合金元素阻碍晶界运动","第二相质点阻碍晶界运动","小角度晶界的移动速度小于大角度晶界的移动速度","再结晶晶粒长大的影响因素包括( )",1,{"answer":83,"createTime":5,"id":84,"options":85,"question":90,"source":20,"type":81},[],1089305695,[86,87,88,89],"γ-Fe的溶碳能力比较大,可获得较大的渗层深度","温度高,扩散系数增加","γ-Fe的扩散系数比较大","γ-Fe的致密度比较大","工业生产中,渗碳一般选择在γ-Fe中进行,原因在于( )"]