[{"data":1,"prerenderedAt":-1},["ShallowReactive",2],{"$fjuBBS8V-8uap-J_gQQoQeHo3nVOkuPqN9lQxxPDmeow":3},{"answer":4,"createTime":5,"id":6,"options":7,"origin":12,"question":16,"related":17,"source":21,"type":22},[],"2026-05-20 20:39:59",1118756485,[8,9,10,11],"分别保持热电偶两端温度恒定","保持热电偶两端温差恒定","保持热电偶冷端温度恒定","保持热电偶热端温度恒定",{"courseId":13,"workId":14,"workName":15},"1000083090","66953745","第六章单元测试","利用热电偶测温时,只有在( )条件下才能进行.( )",[18,23,32,41,50,59,68,77,87,96],{"answer":19,"createTime":5,"id":6,"options":20,"question":16,"source":21,"type":22},[],[8,9,10,11],"v2",0,{"answer":24,"createTime":5,"id":25,"options":26,"question":31,"source":21,"type":22},[],1118756486,[27,28,29,30],"冰浴法","仪表机械零点调整法","计算修正法","电桥法","在实验室中测量金属的熔点时,冷端温度补偿采用( )",{"answer":33,"createTime":5,"id":34,"options":35,"question":40,"source":21,"type":22},[],1118756487,[36,37,38,39],"提高测量灵敏度","减小引线电阻的影响","减小非线性误差","提高电磁兼容性","热电阻测量转换电路采用三线制是为了( )",{"answer":42,"createTime":5,"id":43,"options":44,"question":49,"source":21,"type":22},[],1118756488,[45,46,47,48],"几乎所有物质的电阻率都会随着其本身的温度的变化而变化","负温度系数热敏电阻在不太宽的温度范围内,其电阻-温度特性符合指数规律","负温度系数热敏 电阻的电阻温度系数与温度的平方成正比","利用耗散原理工作时,应使热敏电阻工作在其伏安特性的线性区","关于热敏电阻式传感器的不正确描述是( )",{"answer":51,"createTime":5,"id":52,"options":53,"question":58,"source":21,"type":22},[],1118756489,[54,55,56,57],"44mv","46 mv","48mv","50 mv","镍铬—镍硅热电偶灵敏度为 0.04mV\u002F℃,把它放在温度为 1200℃处,若以指示仪表作为冷端,此处温度为 50℃,试求热电势大小.( )",{"answer":60,"createTime":5,"id":61,"options":62,"question":67,"source":21,"type":22},[],1118756490,[63,64,65,66],"电阻","扭矩","压力","温度","通常用热敏电阻测量.( )",{"answer":69,"createTime":5,"id":70,"options":71,"question":76,"source":21,"type":22},[],1118756491,[72,73,74,75],"温差电动势","接触电动势","磁感应电动势","温差电动势和接触电动势","热电偶的热点势由( )组成.( )",{"answer":78,"createTime":5,"id":79,"options":80,"question":85,"source":21,"type":86},[],1118756519,[81,82,83,84],"在热电偶回路中介入第三种金属材料,只要第三种金属材料两端温度相同,则热电偶产生的热电势保持不变","可用一个已知参比接点温度所得到的校准曲线去确定另一个参比接点温度的校准曲线","通常用纯度很高,物理化学性能非常稳定的材料做成标准热电极,作为确定各种材料的热电特性的对比基准","连接热电偶的许多阴险,只要新形成的各个连接点均处在同一温度下,就不会影响被测热电势的精度","热电偶中间金属定则表示( )",1,{"answer":88,"createTime":5,"id":89,"options":90,"question":95,"source":21,"type":86},[],1118756520,[91,92,93,94],"两接触点材料相同","两接触点材料不同","两接触点的温度相同","两接触点的温度不同","热电偶中产生热电势的条件是:( )",{"answer":97,"createTime":5,"id":98,"options":99,"question":104,"source":21,"type":22},[],1118756521,[100,101,102,103],"对于温敏二极管来说,只要反响饱和电流恒定,其反向电阻可以认为是温度T的函数","温敏三极管在使用时,发射结应正偏","集成温度传感器的感温元件一般采用差分对晶体三极管","集成电路温度传感器按照其输出可以分为电压型和电流型","关于PN结温度传感器的不正确描述是( )"]