[{"data":1,"prerenderedAt":-1},["ShallowReactive",2],{"$fx35_XsVj5RVMbjYACg2zX-c5dz-o0iYVkNp4mwxdytw":3},{"answer":4,"createTime":5,"id":6,"options":7,"origin":12,"question":18,"related":19,"source":29,"type":30},[],"2024-03-27 14:36:00",996470344,[8,9,10,11],"由交换机的生产厂商建立的","由网络用户利用特殊的命令建立的","由网络管理员建立的","交换机在数据转发过程中通过学习动态建立的",{"courseId":13,"courseImg":14,"courseName":15,"workId":16,"workName":17},"1000092681","https:\u002F\u002Ftihai-oss-cloud.itihey.com\u002Fimg\u002Fca13d44d6c191a34cfa99f7ba2b8c76c.jpg","计算机网络","58501049","第五章单元测试","二层交换机中的端口\u002FMAC地址映射表是( )",[20,31,40,43,52,61,71,80,88,93],{"answer":21,"createTime":5,"id":22,"options":23,"question":28,"source":29,"type":30},[],996470340,[24,25,26,27],"传统的Ethernet是用一条作为总线的同轴电缆连接多个节点","连接多个节点的同轴电缆称为"共享介质"","同一时刻有两个或两个以上节点同时利用同轴电缆发送数据的现象称为"冲突"","对应的物理层协议是10Base-T","以下关于"共享介质"、"多路访问"与"冲突"的描述中,错误的是( )","v2",0,{"answer":32,"createTime":5,"id":33,"options":34,"question":39,"source":29,"type":30},[],996470342,[35,36,37,38],"10BASE5","10BASE2","100BASE-T","10BASE-F","( )代表以双绞线为传输介质的快速以太网",{"answer":41,"createTime":5,"id":6,"options":42,"question":18,"source":29,"type":30},[],[8,9,10,11],{"answer":44,"createTime":5,"id":45,"options":46,"question":51,"source":29,"type":30},[],996470346,[47,48,49,50],"Ethernet帧结构包括:前导码与帧前定界符、地址、类型、数据与帧校验","Ethernet的MAC地址长度为32bit","类型字段值等于0x800表示网络层使用IP","Ethernet帧的最小长度为64B,最大长度为1518B","以下关于Ethernet帧结构的描述中,错误的是( )",{"answer":53,"createTime":5,"id":54,"options":55,"question":60,"source":29,"type":30},[],996470348,[56,57,58,59],"交换机根据端口转发表找出对应的帧输出端口号","交换机通过地址学习建立转发表","交换机交换方式主要有三种类型:直接交换、改进直接交换与存储转发交换","直接交换方式的交换机只要接收并检测到目的地址字段、差错校验后立即转发","以下关于交换式局域网的描述中,错误的是( )",{"answer":62,"createTime":5,"id":63,"options":64,"question":69,"source":29,"type":70},[],996470350,[65,66,67,68],"基于交换机端口是静态VLAN划分最常用的方法","可以通过MAC地址来划分VLAN","可以通过IP地址来划分VLAN","可以通过主机使用TCP或UDP来划分VLAN","以下关于VLAN概念的描述中,正确的是( )",1,{"answer":72,"createTime":5,"id":73,"options":74,"question":79,"source":29,"type":70},[],996470352,[75,76,77,78],"建立和维护一个表示MAC地址与交换机端口号对应关系的映射表","在发送主机与接收主机端口之间建立虚连接","完成帧的转发与过滤","执行RIP路由协议","以下关于交换机基本功能的描述中,正确的是( )",{"answer":81,"createTime":5,"id":82,"options":83,"question":86,"source":29,"type":87},[],996470354,[84,85],"对","错","生成树协议是能够自动控制局域网系统的拓扑形成无环路逻辑结构的协议.( )",3,{"answer":89,"createTime":5,"id":90,"options":91,"question":92,"source":29,"type":87},[],996470355,[84,85],"局域网交换机可以在多个端口之间同时建立多个并发连接的局域网设备.( )",{"answer":94,"createTime":5,"id":95,"options":96,"question":97,"source":29,"type":87},[],996470357,[84,85],"虚拟局域网 是一种新型的局域网.( )"]